View DPO70404C_7326688.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

digital and mixed signal oscilloscopes mso/dpo70000 series datasheet engineers rely on an oscilloscope throughout their design cycle, from prototype turn-on to production testing. the mso/dpo70000 series oscilloscopes' unique capabilities combined with exceptional signal acquisition performance and analysis accelerate your measurement tasks. key performance specifications up to 33 ghz analog bandwidth and rise time as fast as 9 ps. enables measurement on the latest high-speed serial standards true 33 ghz real-time analog bandwidth on 2 channels with 33 ghz models industry-leading sample rate and timing resolution 100 gs/s on 2 channels (33, 25, 23, 20, 16, and 12.5 ghz models) four-channel simultaneous performance up to 23 ghz bandwidth up to 50 gs/s real-time sample rate up to 500 megasample record length with multiview zoom ? for quick navigation fastest waveform capture rate with >300,000 wfms/s maximum per channel 16 logic channels with 80 ps timing resolution for debug of digital and analog signals (mso70000 series only) unique icapture ? capability enables viewing analog characteristics of digital channels with single probe connection 6.25 gb/s real-time serial trigger C assures triggering on the first instance of a specified nrz or 8b/10b pattern to allow isolation of pattern-dependent effects application support for high-speed serial industry standards, wideband rf, power supplies, and memory C enables standard- specific certification, measurement automation, and ease of use key features superior signal integrity and excellent signal-to-noise ratio C observe the truest representation of your waveform pinpoint ? triggering C minimize time spent trying to acquire problem signals for efficient troubleshooting and shortened debug time visual trigger C precisely qualify triggers and find unique events in complex waveforms search and mark C provides waveform or serial bus pattern matching and software triggers for signals of interest automated serial analysis options for pci express, 8b/10b encoded serial data, i 2 c, spi, can, lin, flexray, rs-232/422/485/uart, usb 2.0, hsic, mil-std-1553b, and mipi ? d-phy and m-phy p7600 and p7500 trimode ? probing system C perfectly matched signal connectivity p6780, p6750, and p6717a high-performance 17-channel logic probes with bandwidths up to 2.5 ghz for connections to today's fast digital signals (mso70000 series only) www.tektronix.com 1
connectivity usb 2.0 host port on both the front panel and rear panel for quick and easy data storage, printing, and connecting a usb keyboard integrated 10/100 ethernet port for network connection and video out port to export the oscilloscope display to a monitor or projector application support high-speed serial industry standards compliance signalvu ? vector signal analysis ddr memory bus analysis applications design verification including signal integrity, jitter, and timing analysis design characterization for high-speed, sophisticated designs certification testing of serial data streams for industry standards memory bus analysis and debug prototype turn-on and power supply verification research and investigation of transient phenomena production testing of complex systems spectral analysis of transient or wide-bandwidth rf signals system turn-on and verification from the time a design is first powered up through the initial operational checks, the mso/dpo70000 series provide the features you need. uncompromised four-channel acquisition with very low noise and up to 50 gs/s sample rate on all four channels the dpo70000 series ensures that signal integrity checks and timing analysis can be done without worrying about noise and jitter in the scope distorting the measurements. single-shot bandwidths up to 23 ghz on all four channels ensure that you'll capture your signals of interest without worrying about undersampling when using more than 1 or 2 channels. for applications requiring the lowest internal noise and jitter, 100 gs/s performance further reduces noise and jitter and provides additional measurement headroom. quick selection guide model analog bandwidth analog sample rate C 2/4 channels standard memory C analog + digital analog channels logic channels DPO70404C 4 ghz 25 gs/s 31 ms 4 mso70404c 4 ghz 25 gs/s 62 ms 4 16 dpo70604c 6 ghz 25 gs/s 31 ms 4 mso70604c 6 ghz 25 gs/s 62 ms 4 16 dpo70804c 8 ghz 25 gs/s 31 ms 4 mso70804c 8 ghz 25 gs/s 62 ms 4 16 dpo71254c 12.5 ghz 100 gs/s / 50 gs/s 31 ms 4 mso71254c 12.5 ghz 100 gs/s / 50 gs/s 62 ms 4 16 dpo71604c 16 ghz 100 gs/s / 50 gs/s 31 ms 4 mso71604c 16 ghz 100 gs/s / 50 gs/s 62 ms 4 16 dpo72004c 20 ghz 100 gs/s / 50 gs/s 31 ms 4 mso72004c 20 ghz 100 gs/s / 50 gs/s 62 ms 4 16 dpo72304dx 23 ghz 100 gs/s / 50 gs/s 31 ms 4 mso72304dx 23 ghz 100 gs/s / 50 gs/s 62 ms 4 16 dpo72504dx 25 ghz 100 gs/s / 50 gs/s 31 ms 4 mso72504dx 25 ghz 100 gs/s / 50 gs/s 62 ms 4 16 dpo73304dx 33 ghz 100 gs/s / 50 gs/s 31 ms 4 mso73304dx 33 ghz 100 gs/s / 50 gs/s 62 ms 4 16 datasheet 2 www.tektronix.com
unmatched acquisition and signal-to-noise performance the superior signal integrity and excellent signal-to-noise ratio of the mso/ dpo70000 series ensures confidence in your measurement results. up to 33 ghz, matched across 4 channels bandwidth enhancement eliminates imperfections in frequency response all the way to the probe tip. user-selectable filters for each channel provide magnitude and phase correction for more accurate representation of extremely fast signals. in addition, only tektronix allows the user to disable the bandwidth enhancement for applications needing the highest measurement throughput. simultaneous high sample rate on all channels captures more signal details (transients, imperfections, fast edges) 100 gs/s on 2 channels and 50 gs/s on all analog channels for the 12.5 through 33 ghz models 25 gs/s on all analog channels for the 4, 6, and 8 ghz models 12.5 gs/s on all logic channels in the mso70000 series low jitter noise floor and high vertical accuracy provide additional margin in your measurements long record length provides high resolution and extended-duration waveform capture standard 31 ms per channel on the dpo70000 series and 62 ms on the mso70000 series optional up to 125 ms on all four channels (4, 6, and 8 ghz models) and 250 ms (12.5 through 20 ghz models) on all four channels; up to 500 ms on four channels/1 gs on two channels for 23, 25, and 33 ghz models. on the mso70000 series, the record length of logic channels matches the analog record lengths for uncompromised analog and digital acquisition multiview zoom helps you manage long records, compare and analyze multiple waveform segments with high signal-to-noise ratio and low internal noise floor, the mso/ dpo70000 series enable you to perform precise characterization measurements. when debugging a dut, a low noise floor and maximum signal fidelity of the measurement instrument allows you to find the smallest anomalies affecting the dut's performance. for rf signals, a lower noise floor translates into a higher dynamic range, opening the mso/dpo70000 series to a wider range of applications. widest range of probing solutions whether you need to measure 8 gb/s serial data, fast digital logic, or switching currents from your new power supply design, tektronix offers a vast array of probing solutions, including active single-ended, differential, logic, high voltage, current, optical, and a wide range of probe and oscilloscope accessories. p7633 low noise trimode probes simplify complex measurement setups. p6780 differential logic probes provide high-bandwidth connections for up to 16 digital signals. digital and mixed signal oscilloscopes C mso/dpo70000 series www.tektronix.com 3
16-channel digital acquisition (mso70000 series) when you have many interfaces to verify, the mso70000 series with 4 analog and 16 logic channels enables efficient channel-to-channel timing checks. with timing resolution of 80 ps, the mso70000 series' digital acquisition system enables you to make precise timing measurements on as many as 20 channels simultaneously. icapture ? C one connection for analog and digital (mso70000 series) the number of signals that must be verified can often make the checkout of a design long and involved. by using the icapture ? digital-to-analog multiplexer feature, you can easily verify the analog characteristics of any of the 16 signals connected to the mso70000 series' digital channels without changing probes or connections. using icapture ? , you can quickly view the analog characteristics of any input channel. if the signal is working as expected, relegate it to a digital-only view and continue testing other lines. bus decoding and triggering verifying your system operation often requires the ability to see specific system states on a key bus such as the ddr sdram interface. the mso/ dpo70000 series includes parallel and serial bus decoding that provides deeper insight into the system's behavior. using the bus triggering capability of the mso/dpo70000 series to isolate the exact state needed or find invalid bus sequences is as easy as defining the bus and choosing the bit pattern or symbolic word that describes the desired state. in addition, serial bus decoding for 8b/10b encoded data, i 2 c, spi, rs-232/422/485/uart, usb, and mipi ? dsi and csi2 buses enables you to identify where control and data packets begin and end as well as identify subpacket components such as address, data, crc, etc. symbolic bus formats simplify identifying system states and setting up bus triggers. deep record length available on all channels longer duration events such as power supply sequencing and system status words can be analyzed without sacrificing timing resolution using the long memory depths available on all four analog channels in the dpo70000 series as well as the 16 logic channels of the mso70000 series. optional memory depths up to 125 ms (option 10xl) on the 4, 6, and 8 ghz models, 250 ms (option 20xl) on the 12.5 through 20 ghz models and 500 ms (4 channels)/1 gs (2 channels) with option 50xl on the 23 through 33 ghz models are available. 10 ms duration capture of synchronous high-speed and low-speed signals at 25 gs/s. power supplies can be a critical failure point in any system. careful testing of the power delivery system's power on sequence can be time consuming. the mso70000 series provides independent logic thresholds for each logic channel enabling multiple logic voltages to be set up and observed simultaneously for quick verification of the system's power rails. protocol and serial pattern triggering to verify serial architectures, the serial pattern triggering for nrz serial data streams with built-in clock recovery in the mso/dpo70000 series allows correlating events across physical and link layers. the instruments can recover the clock signal, identify transitions, and allow you to set the desired encoded words for the serial pattern trigger to capture. this feature comes standard on the mso70000 series and is available on the dpo70000 series as option st6g. for higher bit rate standards like usb 3.0, the 8b/10b serial pattern trigger and decode covers data rates up to 6.25 gb/s. pattern lock triggering adds an extra dimension to nrz serial pattern triggering by enabling the oscilloscope to take synchronized acquisitions of a long serial test pattern with outstanding time base accuracy. pattern lock triggering can be used to remove random jitter from long serial data patterns. effects of specific bit transitions can be investigated, and averaging can be used with mask testing. pattern lock triggering supports up to 6.25 gb/s nrz serial data streams and is standard on the mso70000 series instruments, or is included as part of option st6g on the dpo70000 series. datasheet 4 www.tektronix.com
visual trigger C find the signal of interest quickly finding the right cycle of a complex bus can require hours of collecting and sorting through thousands of acquisitions for an event of interest. defining a trigger that isolates the desired event speeds up debug and analysis efforts. visual trigger qualifies the tektronix pinpoint triggers by scanning through all waveform acquisitions and comparing them to on-screen areas (geometric shapes). up to eight areas can be created using a mouse or touchscreen, and a variety of shapes (triangles, rectangles, hexagons, or trapezoids) can be used to specify the desired trigger behavior. once shapes are created, they can be edited interactively to create ideal trigger conditions visual trigger extends the tektronix oscilloscope's triggering capabilities for a wide variety of complex signals as illustrated by the examples shown here. customized serial triggering. visual trigger set to find a serial data pattern of 1101 0101. multiple channel triggering. visual trigger areas can be associated with events spanning multiple channels such as packets transmitted on two usb2.0 buses simultaneously. by triggering only on the most important signal events, visual trigger can save hours of capturing and manually searching through acquisitions. in seconds or minutes, you can find the critical events and complete your debug and analysis efforts. using the mark all trigger events feature, once your visual trigger is set, your oscilloscope can automatically search the entire acquired waveform for all events with the same characteristics and mark them for you - a great time-saving feature. ddr memory bus events involve clocks, strobes and data channels as well as multiple amplitudes and bursts of data. ddr memory. visual trigger used to isolate a rare occurrence of a write burst on a specific bit pattern in ddr3. the trigger event is a write dq burst of 11000000, when the dq launch starts from a non-tri-state voltage value. ddr memory bus events involve clocks, strobes and data channels as well as multiple amplitudes and bursts of data. boolean logic trigger qualification. boolean logic using logical or allows the user to simultaneously monitor each bit and capture the occurrence of an anomaly at any point in the acquisition. digital and mixed signal oscilloscopes C mso/dpo70000 series www.tektronix.com 5
trigger on the width of a burst of 10 pulses. by drawing a "must be outside" area before the first clock pulse and a second "must be outside" area after the tenth pulse, as shown, you can define a visual trigger setup that captures the desired burst width. system characterization and margin testing when a design is working correctly and the next task is to fully characterize its performance, the mso/dpo70000 series offers the industry's most comprehensive set of analysis and certification tools, such as math expressions, waveform mask testing, pass/fail testing, event searching, and event marking. tools for automation reduce the tedium, increase reliability, and speed up the process of making hundreds of characterization measurements. advanced waveform analysis full analysis of the power, voltage, and temperature corners of your system under test can be very time consuming. the mso/dpo70000 series offer a wide range of built-in advanced waveform analysis tools. waveform cursors make it easy to measure trace-to-trace timing characteristics, while cursors that link between yt and xy display modes make it easy to investigate phase relationships and safe operating area violations. select from 53 automatic measurements using a graphical palette that logically organizes measurements into amplitude, time, histogram, and communications categories. gather further insight into your measurement results with statistical data such as mean, min, max, standard deviation, and population. define and apply math expressions to waveform data for on-screen results in terms that you can use. access common waveform math functions with the touch of a button. or, for advanced applications, create algebraic expressions consisting of live waveforms, reference waveforms, math functions, measurement values, scalars, and user-adjustable variables with an easy-to-use calculator-style editor. with deep acquisition memory, margin testing can be done over many cycles and long duration trends in the data can be observed. plus, data from the oscilloscope can be captured into microsoft excel using the unique excel toolbar, and formatted into custom reports using the word toolbar provided with the mso/dpo70000 series. automated tools to increase measurement throughput ease of use and measurement throughput are key when a large number of measurements must be completed with a performance oscilloscope. mso70000 series come standard with the dpojet advanced jitter and eye diagram measurement application, providing the tools you need to quickly perform a high volume of measurements and collect statistics. dpojet essentials is standard on the dpo70000 series with the dpojet advanced version available as an option. application-specific measurement packages are also available that extend dpojet and perform the extensive set of tests required by industry standard groups. user-defined measurements can be added to dpojet using the application developers kit (adk) that comes standard with the oscilloscope. dpojet jitter and eye diagram analysis C simplify identifying signal integrity concerns, jitter, and their related sources with dpojet software. dpojet provides the highest sensitivity and accuracy available for real-time oscilloscopes. error detector when performing receiver testing on a serial transceiver, a ber measurement is often required. the mso/dpo70000 series offer an optional built-in error detector function for 8b/10b-encoded signals. the built-in error detector comes with presets for testing pcie, usb3.0, and sata signals up to 6 gb/s. the error detector settings can be customized to work with a generic 8b/10b-encoded signal and can be set to detect bit, character, or frame errors. when an error is detected, the scope will trigger and display the waveform bits where the error occurred. datasheet 6 www.tektronix.com
rf and vector signal analysis when vector signal analysis of rf or baseband signals are needed the optional signalvu ? application enables measurements in multiple domains (frequency, time, phase, modulation) simultaneously. signalvu ? measurements are fully correlated with the scope's time domain acquisition and triggering. time domain events, such as commands to an rf subsystem, can be used as trigger events, while the subsystem's rf signal can be seen in the frequency domain. signalvu also provides wireless standards measurements such as ieee 802.11 a/b/g/j/p/n/ac that can be correlated in the time domain. signalvu ? vector signal analysis C easily verify wide-bandwidth designs such as wideband radar, high data-rate satellite links, wi-fi, or frequency-hopping radios and characterize wideband spectral events. signalvu ? combines the functionality of a vector signal analyzer, a spectrum analyzer, and the powerful triggering capabilities of the mso/ dpo70000 series C all in a single package. tekexpress ? software automation framework the tekexpress ? software automation framework has been developed for automated one-button testing of high-speed serial data standards. tekexpress ? efficiently executes the required tests for many serial standards such as sata, sas, mipi ? d-phy, mhl, mipi ? m-phy, pci express ? , usb 3.0, displayport, and 10gbase-t ethernet. run on an external windows pc, the tekexpress ? software orchestrates the instrument setup and control sequences to provide complete test results for complete design validation. beyond using the tekexpress ? framework, custom applications that you develop yourself using application development environments such as matlab ? can further extend the tool set of the mso/dpo70000 series. characterization measurements depend upon accuracy and repeatability. the wide bandwidth and unmatched signal fidelity of the mso/dpo70000 analog front end ensures that your signal quality measurements such as rise times are faithful and amplitude correct with flatness of 0.5 db. tekexpress ? usb 3.0 automated test software (option usb-tx) C tekexpress ? usb 3.0 provides an automated, simple, and efficient way to test usb 3.0 transmitter and receiver hosts and devices consistent with the requirements of the superspeed universal serial bus electrical compliance test specification. the application automates selection of appropriate fixture de-embed, ctle and reference channel emulation filters and measurement selections based on device type, test type, test points, and selected probes. in addition, usb-tx leverages dpojet allowing debug and advanced characterization of usb 3.0 solutions. tekexpress ? sata automated compliance test software C complete support for sata gen1/2/3 defined test suites for transmitters and receivers. reduce your compliance test time by approximately 70% with simple, efficient automation of all required test suites with tekexpress ? software. also included is auto-recognition of all required test equipment, precise dut/host control, and one-button testing. digital and mixed signal oscilloscopes C mso/dpo70000 series www.tektronix.com 7
tekexpress ? pci express gen 1/2/3 automated test software (option pce3) - provides the most comprehensive solution for pci express gen 1/2/3 transmitter compliance testing as well as debug and validation of pci express devices against the pci-sig specifications. the application automates selection of appropriate fixture de- embed and reference channel emulation filters and measurement selections based on test type, device data rate, transmitter equalization, link width, and selected probes. in addition, the option pce3 application includes a tekexpress compliance automation solution that integrates the pci-sig's sigtest test software with tektronix' dpojet- based pci express jitter and eye diagram & sdla serial data link analysis visualizer analysis tools for debug. results are presented in a comprehensive html format for engineering test documentation. tekexpress ? mhl advanced analysis and compliance software (option mhd) - provides the most comprehensive solution for mhl 1.0/2.0/1.3/2.1 compliance testing as well as debug and validation of mhl devices against the latest mhl specifications. the application automates transmitter, sink and dongle electrical tests. results are presented in a comprehensive html format for engineering test documentation custom filter and de-embed capability create your own filters or use the filters provided as standard with the mso/dpo70000 series to enhance your ability to isolate or remove a component of your signal (noise or specific harmonics of the signal). these customizable fir filters can be used to implement signal-processing techniques, such as removing signal pre-emphasis or minimizing the effects of fixtures and cables connected to the device under test. using the optional serial data link analysis visualizer (sdla64) application, you can gain further insight into serial data links with the capability to emulate the serial data channel from its s-parameters, remove reflections, cross- coupling, and loss caused by fixtures, cables, or probes, and open closed eyes caused by channel effects using receiver equalization techniques, such as ctle, dfe, ffe. ibis-ami models for silicon-specific receiver equalization can used to observe on-chip behavior. sdla - serial data link analysis visualizer (option sdla64) C offers the capability to emulate the serial data channel, de-embed fixtures, cables, or probes, and add or remove equalization. option sdla64 also provides processing of waveforms with ibis- ami receiver equalization, or ctle, ffe and/or dfe equalization. dpojet provides advanced measurement and jitter analysis of the resulting waveforms. application-specific solutions C enable standard-specific certification, measurement automation, and extended signal analysis accurate, simple, and customizable physical layer certification testing C for designers with industry-standard certification needs, standard-specific compliance and analysis modules that configure the pass/fail waveform mask and measurement limit testing are available as options on the mso/ dpo70000 series. modules are available for pci express ? , ddr memory, serial ata, sas, hdmi, ethernet, displayport, mipi ? d-phy and m-phy, power supplies, and usb. see the following list for highlights of the available application-specific solutions: datasheet 8 www.tektronix.com
ddr memory bus analysis (option ddra) C automatically identify ddr1, lpddr, lpddr2, lpddr3, ddr2, ddr3, ddr4, and gddr3 reads and writes and makes jedec conformance measurements with pass/fail results on all edges in every read and write burst. ddra provides capabilities for measurements of clock, address, and control signals. in addition to enabling conformance testing ddra with dpojet is the fastest way to debug complex memory signaling issues. ddra can also use the command/address lines to trigger on specific read/write states when running on the mso70000 series mixed signal oscilloscope, which offers 16 channels of digital logic probing. usb 3.0 transmitter test solution (option usb3) C perform verification, characterization, and debug of usb 3.0 devices. measurements are implemented in dpojet and are compliant to the usb 3.0 specification. for compliance and automation, usb-tx is available. pci express ? transmitter compliance and debug (option pce3) C analyze the performance of your pci express ? rev 1.0, 2.0, or 3.0 (draft spec) design with comprehensive test support. using dpojet, option pce3 enables tests that conform to pci-sig standards. ethernet compliance test solution (option et3) C receive full phy layer support for ethernet variants 10base-t, 100base-tx, and 1000base-t with the comprehensive, integrated tektronix ? ethernet tool set. analog verification, automated compliance software, and device characterization solutions are all included. digital and mixed signal oscilloscopes C mso/dpo70000 series www.tektronix.com 9
mipi ? d-phy characterization and analysis solution (option d-phy) C verify to the d-phy specification by rapidly characterizing and discovering sources of jitter and signal integrity concerns using the fully flexible and customizable test setup. using dpojet, option d-phy enables transmitter high-speed data-clock timing measurements, along with a full range of electrical characteristics in high-speed or low-power modes. mipi ? m-phy debug, analysis, characterization and conformance test solution (option m-phy) C verify to the m-phy specification by rapidly characterizing and discovering sources of jitter and signal integrity concerns. using dpojet, option m-phy enables transmitter signaling and timing measurements such as differential transmit eye diagrams, rise and fall times, slew rate, amplitude parameters, common mode voltages on each lane for both the large and small amplitude configurations, as well as the terminated and unterminated cases. xgbt 10gbase-t automated compliance software C quickly perform 10gbase-t measurements per the ieee 802.3an-2006 standard including power spectral density (psd), power level, and linearity, with a simplified instrument configuration. xgbt provides flexible control over test configurations and analysis parameters, enabling more in-depth device characterization. 10gbase-kr/kr4 compliance and debug solution (option 10g-kr) - automated compliance measurements for ieee 802.3ap-2007 specifications. this option includes an automated compliance solution and debugging with dpojet. the automated test setup measures transmitter equalization levels generating 12 results for each tap and 120 results for 9 different measurements in approximately 15 minutes. datasheet 10 www.tektronix.com
tektronix sfp+ qsfp+ tx is developed on a real time oscilloscope platform, which is the platform of choice for engineers designing their products around sff-8431 & sff-8634 technology. option sfp-tx and sfp-wdp enable both an automation solution (for compliance) and dpojet option (for debug), users can save up to 80% on testing time compared to manual testing. twdpc - transmitter waveform distortion penalty for copper measurements are available with option sfp-wdp. sff-8431 sfp+ twdpc based matlab code is integrated into the sfp-wdp option to make sure engineers can use this measurement in the automated setup. hdmi compliance test solution (option ht3) C a fast, efficient solution for hdmi compliance measurement challenges, no matter if you are working on a source, cable, or sink solution. this application provides all the hdmi compliance test solutions you need to ensure quality and interoperability. displayport compliance test solution (option dp12) C supports displayport compliance test standard (cts) source test with four-line simultaneous testing using the tektronix ? p7300sma series probes and displayport software. detailed test reports with waveform plots, pass/fail results, and margin analysis are included. power measurement and analysis software (option pwr) C improve the efficiency of switching power supplies with increased power densities. measure and analyze power dissipation in power supply switching devices and magnetic components, and generate detailed test reports in customizable formats. digital and mixed signal oscilloscopes C mso/dpo70000 series www.tektronix.com 11
certification this is the start of your concept. before a product can go to market, you often need to complete a series of certification tests on the industry- standard high-speed serial buses in your design. these tests can involve many hours of wrestling with test fixtures, reading certification documents, and collecting sufficient data to validate that your system passes the required tests. mso70000 C a dedicated solution configured for today's high-speed serial design challenges the mso70000 mixed signal oscilloscopes are specially configured to address high-speed serial data designs by encapsulating many of the serial domain features needed for high-speed serial verification and characterization. these standard features on the mso70000 series are options on the dpo70000 series. serial pattern triggering C real-time serial pattern triggering and protocol decode with built-in clock recovery recovers the clock signal, identifies the transitions, and decodes characters and other protocol data. you can see the 8b/10b bit sequences decoded into their words for convenient analysis, and set the desired encoded words for the serial pattern trigger to capture. with pattern lock triggering, the mso70000 series can synchronize to long serial test patterns with data rates up to 6.25 gb/s and remove random jitter. dpojet jitter, timing, and eye diagram analysis C the mso70000 series features the highest-accuracy jitter and timing measurements as well as comprehensive analysis algorithms. tight timing margins demand stable, low-jitter designs. you can make jitter measurements over contiguous clock cycles on every valid pulse in a single-shot acquisition. multiple measurements and trend plots quickly show system timing under variable conditions, including random, deterministic, and bounded uncorrelated jitter separation. communications mask testing C provides a complete portfolio of masks for verifying compliance to serial communications standards. over 150 masks including the following standards are supported C pci express ? , itu-t/ansi t1.102, ethernet ieee 802.3, ansi x3.263, sonet/ sdh, fibre channel, infiniband, usb, serial ata, serial attached scsi, ieee 1394b, rapidio, oif standards, open base station architecture initiative (obsai), common public radio interface (cpri). communications mask testing. 62 ms record length C 62 ms on all four channels provides a longer time sequence at high resolution. optional record lengths up to 125 ms for the 4, 6, and 8 ghz models, 250 ms for the 12.5 through 20 ghz models and 500 ms (4 channels)/1 gs (2 channels) on 23 to 33ghz models extend the acquisition time sequence. with standard features that extend the functionality of the tektronix dpo70000 series to address high-speed serial signal analysis and certification, the mso70000 series offers a specialized instrument that efficiently addresses your design challenges. protocol decode for high speed serial buses the mso/dpo70000 series oscilloscopes provide optional protocol analysis for hss buses such as pci express gen 1/2/3, mipi d-phy (csi, dsi) and 8b/10b-encoded buses. with these capabilities, bit sequences can be decoded into familiar commands and data packets for faster analysis. with the pci express decoder, the data is displayed in a protocol- aware view using characters and terms from the standard, such as the ordered sets: skp, electrical idle, and eieos table view of the bus protocol. the results table provides a protocol view of the bus and with a mouse click allows correlation of what is happening in the physical layer to what is happening in the protocol layers. datasheet 12 www.tektronix.com
protocol and electrical views of an hss bus. the data in the results table and the acquired waveform are time correlated, enhancing the ability to identify possible causes of protocol errors due to electrical signaling. both the 8b/10b serial bus trigger and the advanced search and mark feature on the oscilloscope are integrated with the hss protocol decode to quickly isolate events of interest in a hss data stream. user-selectable bandwidth limit filters while wide bandwidth is needed to characterize your high-speed serial designs, certification testing can require a specific instrument bandwidth appropriate for the signal's data rate in order to correlate test results between different test labs. the mso/dpo70000 series feature user- selectable bandwidth limiting filters. using these bandwidth limit filters which range from 500 mhz to 32 ghz, you will ensure that your measurement is done using the bandwidth specified by the industry standard. debugging throughout the design cycle, mso/dpo70000 series oscilloscopes provide the ability to debug malfunctioning subsystems and isolate the cause. with the high waveform capture rate of fastacq ? you can quickly identify signal anomalies that occur intermittently C saving minutes, hours, or even days by quickly revealing the nature of faults so sophisticated trigger modes can be applied to isolate them. using pinpoint ? triggers, infrequent events such as glitches or signal runts caused by bus contention or signal integrity issues can be captured, analyzed, and then eliminated. fastacq ? C expedites debugging by clearly showing imperfections more than just color grading or event scanning, the fastacq ? proprietary dpx ? acquisition technology captures signals at more than 300,000 waveforms per second on all four channels simultaneously, dramatically increasing the probability of discovering infrequent fault events. and with a simple turn of the intensity knob you can clearly see a world others don't see, displaying the complete picture of your circuit's operation. some oscilloscope vendors claim high waveform capture rates for short bursts of time, but only mso/dpo70000 series oscilloscopes, enabled by dpx ? technology, can deliver these fast waveform capture rates on a sustained basis. pinpoint ? trigger whether you're trying to find a problem signal or need to isolate a section of a complex signal for further analysis, like a ddr read or write burst, tektronix pinpoint ? triggering provides the solution. pinpoint ? triggering allows selection of virtually all trigger types on both a and b trigger events delivering the full suite of advanced trigger types for finding sequential trigger events. pinpoint ? triggers provide trigger reset capabilities that begin the trigger sequence again after a specified time, state, or transition so that even events in the most complex signals can be captured. other oscilloscopes typically offer less than 20 trigger combinations; pinpoint ? triggering offers over 1400 combinations, all at full performance. visual trigger extends the pinpoint triggering's capabilities, adding another level of trigger qualification to find important events in a wide variety of complex signals. with enhanced triggering, trigger jitter is reduced to <100 fs. with this stability at the trigger point, the trigger point can be used as a measurement reference. b scan event trigger users who wish to create eye diagrams from data bursts synchronized or initiated by an a event will find the b event scan trigger function especially useful. b event scan is an a to b trigger sequence that will trigger and capture burst event data of interest defined by the b event setup menu. captured bits can be scanned in a sequential or randomized fashion, alternatively the trigger can toggle between two successive b trigger events. b event scan identifies specific events to build an eye diagram. digital and mixed signal oscilloscopes C mso/dpo70000 series www.tektronix.com 13
use b event scan trigger on ddr dqs edges used to construct an eye diagram of all bits in a burst. logic pattern triggering logic pattern triggering allows logic qualification that controls when to look for faults and ignore events that do not occur during the desired state. on the mso70000 series, up to 20-bit wide logic pattern triggering enhances the pinpoint ? trigger capabilities by helping you isolate the specific system state and analog events that are causing system failure. digital a then analog b triggering (mso70000 series only) advanced triggering capabilities include digital a then analog b to help you to identify a specific digital pattern or system state and then wait for an analog event such as a runt pulse to trigger the acquisition. integrated logic channels (mso70000 series only) the mso70000 series extends the debug capabilities of a 4-channel oscilloscope with an additional 16 logic channels that can be used to provide system level context when the fault occurs. this context, such as an illegal system state or error, may be the clue that leads to the root cause. when other oscilloscopes require you to use a logic analyzer to see the digital data you need to solve your debugging challenge, the mso70000 series can effectively debug and verify many digital timing issues in the system more quickly and easily. with 80 ps timing resolution and channel-to-channel skews of as little as 160 ps, the integrated logic channels allow you to view and measure time-correlated digital and analog data in the same display window. integrated logic channels C provide time-correlated analog and digital visibility for system debugging. fastframe ? when the key events you are interested in are widely spaced in time, such as bursts of activity on a bus, the fastframe ? segmented memory feature on the mso/dpo70000 series enables you to capture the events of interest while conserving acquisition memory. using multiple trigger events, fastframe ? captures and stores short bursts of signals and saves them as frames for later viewing and analysis. on the mso70000 series, fastframe ? and bus or logic triggering enable you to capture your fastest, bursty signals on the analog channels at the highest sample rate while the logic channel trigger recognizes the bus cycle of interest. capturing thousands of frames is possible, so long-term trends and changes in the bursting signal can be analyzed. icapture ? (mso70000 series only) when an anomaly is seen on digital lines, icapture ? delivers new insight into the analog behavior of the digital signals. with icapture ? , you can route any 4 of the 16 logic channels to the mso70000 series' analog acquisition system so that these signals can be viewed in finer detail. the unique multiplexer circuitry of icapture ? provides simultaneous digital and analog views of signals without needing to move the logic probe or double probe the circuit. advanced search and mark isolating the key event causing your system failure can often be a tedious task. with the advanced event search and mark feature standard on the mso/dpo70000 series, examining data and highlighting important events, skipping the unimportant ones, and enhancing the comprehension of event relationships is made easy. with asm, you'll be able to navigate through long record length acquisitions effortlessly and quickly locate the event you have been trying to find. advanced searches can be defined individually or using the scope's trigger settings as the definition for the search. even visual trigger areas can be used as part of the asm criteria. datasheet 14 www.tektronix.com
advanced search and mark C highlights important events and provides convenient previous and next buttons and mouse clicks to navigate between events of interest effortlessly. embedded serial bus (i 2 c, spi, rs-232/422/485, uart, usb) decoding and triggering the mso/dpo70000 series instruments provide integrated support for a broad range of serial buses C i 2 c, spi, rs-232/422/485/uart, and usb. this support for up to 16 separate serial buses enables you to monitor or debug subsystems and components, such as frequency synthesizers, d/a converters, and flash memory that are controlled or monitored through serial control buses. while monitoring or debugging these serial buses alone is relatively easy, decoding events on the serial bus can also enable more complex system-level debugging. when you experience an issue with a higher-speed serial interface, the clue to what is going wrong may be found by using the serial bus decode feature to observe the data on your i 2 c, spi, rs-232/422/485/uart, or usb interface. probing C analog and digital often the biggest challenge in debugging a system is getting access to the required signals. tektronix offers a wide array of probing solutions, including the p7600 and p7500 trimode ? probing system with bandwidths that are perfectly matched to the mso/dpo70000 series. the p7600 and p7500 trimode ? probes allow you to switch among differential, single ended, and common-mode measurements without moving the probe from its connection points. the p7600 series combines low noise, 33 ghz bandwidth and the convenience of trimode probing. the p7500 series offers probes with performance from 4 ghz to 25 ghz and offers several low-cost solder tips with quick connection features that allow moving the probe to various solder points fast and easy. the low-cost solder tips available for the p7500 trimode ? probes allow quick connection so moving the probe to various solder points is fast and easy. on the mso70000 series, the p6780 differential, p6750 high-density d- max ? , and p6717a general-purpose logic probes provide connectivity to low-speed and high-speed digital signals with low loading, small size, and a range of accessories for soldering or browsing. solder tip accessories designed for the p6780 differential logic probes provide access to signals on tightly spaced vias and fine-pitched components. digital and mixed signal oscilloscopes C mso/dpo70000 series www.tektronix.com 15
production testing in addition to assisting engineers with design tasks, the mso/dpo70000 series allow test engineers to test analog and digital signals with a wide range of clock speeds and data rates. rackmount options are available for mounting the mso/dpo70000 series into an eia standard 19 inch (487 mm) rack. an ieee 488.2 standard gpib interface is standard on all models. lxi class c using the lxi web interface, you can connect to the mso/dpo70000 series through a standard web browser by simply entering the oscilloscopes ip address in the address bar of the browser. the web interface enables viewing of instrument status and configuration, as well as status and modification of network settings. all web interaction conforms to the lxi class c specification. openchoice ? analysis tools the openchoice ? software allows you to customize your test and measurement system with familiar analysis tools. the analysis and networking features of the openchoice ? software add more flexibility to tektronix mso/dpo70000 series oscilloscopes: using the fast embedded bus, waveform data can be moved directly from acquisition to analysis applications on the windows ? desktop at much faster speeds than conventional gpib transfers. implementation by tektronix of industry-standard protocols, such as tekvisa ? interface and activex controls, are included for using and enhancing windows ? applications for data analysis and documentation. ivi instrument drivers are included to enable easy communication with the oscilloscope using gpib, rs-232, and lan connections from programs running on the instrument or an external pc. the application development kit (adk) extends the openchoice ? framework to support custom end-user and third-party application development. adk documentation describes how to implement the data store public interface to speed internal transfer of waveform data through user-created data processing algorithms and display the results in real time on the oscilloscope screen. the data store public interface is >2x faster than traditional gpib-based data transfer techniques. the data store public interface is accessible through mathworks matlab ? or .net languages such as c# or visual basic. other features of the adk include a dpojet plug-in that enables users to add custom measurements to this market-leading timing and jitter analysis tool. the adk provides comprehensive documentation and coding examples to aid the user in developing their own unique analysis tool kit to quickly capture and analyze their signals. research with industry-leading acquisition speed and signal-to-noise ratio performance, the mso/dpo70000 series can provide researchers with tools that allow them to capture, display, and analyze high-speed and transient signals with unmatched precision. full control of acquisition and display parameters you have full control of the instrument's acquisition modes. choose the mode you need to do your job the fastest: automatic, constant sample rate, or manual settings. when you are doing signal exploration and want a lively signal, the default automatic mode provides you with the liveliest display update rate. if you want the highest real-time sample rate that will give you the most measurement accuracy, then the constant sample rate mode is for you. it will maintain the highest sample rate and provide the best real-time resolution. finally, the manual mode ensures direct and independent control of the sample rate and record length for applications requiring specific settings. document tools the openchoice ? architecture provides a comprehensive software infrastructure for faster, more versatile operations. data transfer utilities, such as the excel or word toolbar plug-ins can be used to simplify analysis and documentation on the windows ? desktop or on an external pc. unmatched usability the mso/dpo70000 series instruments excel in usability with a suite of productivity features, such as a touch screen, flat menu structures, intuitive graphical icons, knob-per-channel vertical controls, right clicks, mouse wheel operation, and familiar windows-based controls. remote desktop when your oscilloscope is connected to a network, use the windows ? remote desktop utility to access your oscilloscope from across the lab or across the globe. myscope ? C create your own control windows easily create your own personalized "toolbox" of oscilloscope features in a matter of minutes using a simple, visual, drag-and-drop process. once created, these custom control windows are easily accessed through a dedicated myscope ? button and menu selection on the oscilloscope button/menu bar, just like any other control window. you can make an unlimited number of custom control windows, enabling each person who uses the oscilloscope in a shared environment to have their own unique control window. myscope ? control windows will benefit all oscilloscope users, eliminating the ramp-up time that many face when returning to the lab after not using an oscilloscope for a while, and enables the power user to be far more efficient. everything you need is found in one control window rather than navigating through multiple menus to repeat similar tasks. datasheet 16 www.tektronix.com
option asset management: floating or fixed many tektronix application solutions and hardware options are enabled with an encrypted license key that is entered through the oscilloscope's utilities menu. you now have two options. the first option is a fixed license applied to a specific scope serial number and is permanently enabled. a fixed license cannot be moved from one oscilloscope to another. the second option is a floating license. floating licenses provide the capability to move a license-key enabled option from one oscilloscope to another. this capability helps users with distributed teams and several tektronix mso/dpo70000, or dpo7000, and mso/dpo5000 series oscilloscopes to better manage their assets and deploy applications or other options such as extended memory to the oscilloscope where it is needed. this view in the floating license system identifies the license's current user and location allowing you to easily manage your floating license inventory. managing and deploying floating licenses uses an easy online licensing management system. all floating license management functions are maintained on tektronix secure servers and no infrastructure or your company it department involvement is necessary. simply utilize your mytek account to access, track, and deploy your oscilloscope floating- license enabled options. performance you can count on depend on tektronix ? to provide you with performance you can count on. all tektronix ? products are backed with industry-leading service and support. specifications all specifications apply to all models unless noted otherwise. model overview DPO70404C, mso70404c dpo70604c, mso70604c dpo70804c, mso70804c dpo71254c, mso71254c dpo71604c, mso71604c dpo72004c, mso72004c dpo72304dx , mso72304dx dpo72504dx , mso72504dx dpo73304dx , mso73304dx analog channels 4 4 4 4 4 4 4 4 4 digital channels (mso70000 series only) 16 16 16 16 16 16 16 16 16 analog bandwidth (user-selectable dsp enhance) (C3 db) 4 ghz 6 ghz 8 ghz 12.5 ghz 16 ghz 20 ghz 23 ghz (2 ch) 23 ghz (4 ch) 25 ghz (2 ch) 23 ghz (4 ch) 33 ghz (2 ch) 23 ghz (4 ch) hardware analog bandwidth (-3 db) 4 ghz 6 ghz 8 ghz 12.5 ghz 16 ghz (typical) 16 ghz (typical) 23 ghz 25 ghz 33 ghz rise time (typical) 10% to 90%: 98 ps 20% to 80%: 68 ps 10% to 90%: 65 ps 20% to 80%: 45 ps 10% to 90%: 49 ps 20% to 80%: 34 ps 10% to 90%: 32 ps 20% to 80%: 22 ps 10% to 90%: 24.5 ps 20% to 80%: 17 ps 10% to 90%: 18 ps 20% to 80%: 14 ps 10% to 90%: 17 ps 20% to 80%: 13 ps 10% to 90%: 16 ps 20% to 80%: 12 ps 10% to 90%: 13 ps 20% to 80%: 9 ps digital and mixed signal oscilloscopes C mso/dpo70000 series www.tektronix.com 17
DPO70404C, mso70404c dpo70604c, mso70604c dpo70804c, mso70804c dpo71254c, mso71254c dpo71604c, mso71604c dpo72004c, mso72004c dpo72304dx , mso72304dx dpo72504dx , mso72504dx dpo73304dx , mso73304dx sample rate (1, 2 ch) (maximum sample rate is 50 gs/s on digital channels routed to an analog channel through the icapture ? analog mux) 25 gs/s 25 gs/s 25 gs/s 100 gs/s 100 gs/s 100 gs/s 100 gs/s 100 gs/s 100 gs/s sample rate (3, 4 ch) 25 gs/s 25 gs/s 25 gs/s 50 gs/s 50 gs/s 50 gs/s 50 gs/s 50 gs/s 50 gs/s sample rate (et/it mode) 5 ts/s 5 ts/s 5 ts/s 10 ts/s 10 ts/s 10 ts/s 10 ts/s 10 ts/s 10 ts/s record length, points (each channel, standard) 31.25 m 62.5 m (mso70000 series) 31.25 m 62.5 m (mso70000 series) 31.25 m 62.5 m (mso70000 series) 31.25 m 62.5 m (mso70000 series) 31.25 m 62.5 m (mso70000 series) 31.25 m 62.5 m (mso70000 series) 31.25 m 62.5 m (mso70000 series) 31.25 m 62.5 m (mso70000 series) 31.25 m 62.5 m (mso70000 series) record length (each channel, opt. 5xl, dpo70000 series) 62.5 m 62.5 m 62.5 m 62.5 m 62.5 m 62.5 m 62.5 m 62.5 m 62.5 m record length (each channel, opt. 10xl) 125 m 125 m 125 m 125 m 125 m 125 m 125 m 125 m 125 m record length (each channel, opt. 20xl) n/a n/a n/a 250 m 250 m 250 m 250 m 250 m 250 m record length (each channel, opt. 50xl) n/a n/a n/a n/a n/a n/a 500 m each channel, 1g on 2 channels 500 m each channel, 1g on 2 channels 500 m each channel, 1 g on 2 channels timing resolution 40 ps (25 gs/s) 40 ps (25 gs/s) 40 ps (25 gs/s) 10 ps (100 gs/s) 10 ps (100 gs/s) 10 ps (100 gs/s) 10 ps (100 gs/s) 10 ps (100 gs/s) 10 ps (100 gs/s) duration at highest sample rate (standard) 1.25 ms 2.5 ms (mso70000 series) 1.25 ms 2.5 ms (mso70000 series) 1.25 ms 2.5 ms (mso70000 series) 0.31 ms 0.61 ms (mso70000 series) 0.31 ms 0.61 ms (mso70000 series) 0.31 ms 0.61 ms (mso70000 series) 0.31 ms 0.61 ms (mso70000 series) 0.31 ms 0.61 ms (mso70000 series) 0.31 ms 0.61 ms (mso70000 series) duration at highest sample rate (opt. 5xl, dpo70000 series) 2.5 ms 2.5 ms 2.5 ms 0.63 ms 0.63 ms 0.63 ms 0.63 ms 0.63 ms 0.63 ms duration at highest sample rate (opt. 10xl) 5.0 ms 5.0 ms 5.0 ms 1.3 ms 1.3 ms 1.3 ms 1.3 ms 1.3 ms 1.3 ms duration at highest sample rate (opt. 20xl) 2.5 ms 2.5 ms 2.5 ms 2.5 ms 2.5 ms 2.5 ms duration at highest sample rate (opt. 50xl) 5 ms each channel, 10 ms 2 channels 5 ms each channel, 10 ms 2 channels 5 ms each channel, 10 ms 2 channels vertical noise (% of full scale) (50 mv/div, bandwidth filter on, max sample rate) (typical) 0.28% 0.32% 0.35% 0.36% 0.36% 0.56% 0.58% 0.58% 0.58% time base range (auto mode) 20 ps/div to 1000 s/div 20 ps/div to 1000 s/div 20 ps/div to 1000 s/div 10 ps/div to 1000 s/div 10 ps/div to 1000 s/div 10 ps/div to 1000 s/div 10 ps/div to 1000 s/div 10 ps/div to 1000 s/div 10 ps/div to 1000 s/div timing resolution (et/it mode) 200 fs 200 fs 200 fs 100 fs 100 fs 100 fs 100 fs 100 fs 100 fs datasheet model overview 18 www.tektronix.com
DPO70404C, mso70404c dpo70604c, mso70604c dpo70804c, mso70804c dpo71254c, mso71254c dpo71604c, mso71604c dpo72004c, mso72004c dpo72304dx , mso72304dx dpo72504dx , mso72504dx dpo73304dx , mso73304dx delta time measurement accuracy (rms over <100 ns duration; single shot; signal rise time = 1.2 scope rise time; 100 mv/div, bandwidth filter on, max sample rate) 1.48 ps 1.33 ps 1.24 ps 1.23 ps 1.15 ps 1.43 ps 639 fs 639 fs 555 fs jitter noise floor (with bwe enabled) (typical) 340 fs 300 fs 300 fs 270 fs 270 fs 290 fs <380 fs <380 fs <340 fs vertical system C analog channels bandwidth limit depending on instrument model: 33 ghz to 1 ghz in 1 ghz steps, or 500 mhz depending on instrument model, hardware-only bandwidth settings at 33, 25, 23, 20, 16, 12.5, 8, 6, and 4 ghz channel-to-channel isolation any two channels at equal vertical scale 0 ghz to 10 ghz: 120:1 >10 ghz to 12 ghz: 80:1 >12 ghz to 15 ghz: 50:1 >15 ghz to 20 ghz: 25:1 >20 ghz to 33 ghz: 20:1 dc gain accuracy 2% (of reading) channel delay (typical) 10 ps for any two channels at equal v/div and coupling on c models 1 ps for any two channels at equal v/div and coupling on dx models effective number of bits (typical) 5.5 bits at 50 mv/div, bandwidth filter on, max bandwidth up to 13 ghz, max sample rate signal-to-noise ratio (typical) 34 db input coupling dc (50 ), gnd input resistance selection 50 3%, 1 m with tca-1meg adapter input sensitivity range 23 ghz, 25 ghz, and 33 ghz models 6.25 mv/div to 600 mv/div (62.5 mv to 6 v full scale) 20 ghz models 20 to 500 mv/div (200 mv to 5 v full scale) all other models 10 mv/div to 500 mv/div (100 mv to 5 v full scale) maximum input voltage, 50 also determined by tekconnect ? accessory. 23 ghz, 25 ghz, and 33 ghz models 1.2 v fs : 1.5 v relative to the termination bias (30 ma maximum), 5 v absolute maximum input. >1.2 v fs : 8.0 v. all other models <5.0 v rms for 100 mv/div; 1.0 v rms for <100 mv/div digital and mixed signal oscilloscopes C mso/dpo70000 series model overview www.tektronix.com 19
termination voltage range 23 ghz, 25 ghz, and 33 ghz models 1.2 v fs : -3.5 v to +3.5 v >1.2 v fs : 0 v. all other models 0 v only offset accuracy 10 mv/div to 99.5 mv/div (0.35% (offset value-position) + 1.5 mv + 1% of full scale) 100 mv/div to 500 mv/div (0.35% (offset value-position) + 7.5 mv + 1% of full scale) offset range 23 ghz, 25 ghz, and 33 ghz models +3.4 v to ? 3.4 v all other models 10 mv/div: 450 mv 20 mv/div: 400 mv 50 mv/div: 250 mv 100 mv/div: 2.0 v 200 mv/div: 1.5 v 500 mv/div: 0.0 v passband flatness (20, 50, 100, 250 mv/div) (typical) 0.5 db to 50% of nominal bandwidth position range 5 div vertical resolution 8 bit (11 bit with averaging) vertical system C digital channels digital bandwidth with p6780 logic probe 2.5 ghz with p6750 or p6717a logic probe 1 ghz input resistance selection with p6780 logic probe 20 k to ground per side or 40 k differential mode 2.0%, 0.5 pf with p6750 or p6717a logic probe 20 k 1.0%, 3 pf trigger clock/qualifier input 1 vertical resolution 1 bit thresholds one per channel, independently set threshold accuracy 75 mv + 3% of threshold setting threshold resolution 5 mv datasheet vertical system C analog channels 20 www.tektronix.com
threshold voltage range with p6780 logic probe C2 to +4.5 v with p6750 or p6717a logic probe C1.5 to +4.0 v minimum voltage swing 300 mv p-p maximum input voltage 15 v nondestruct horizontal system channel-to-channel deskew range 75 ns time base accuracy 1.5 ppm initial accuracy, aging <1 ppm per year time base delay time range C5.0 ks to 1.0 ks trigger jitter <100 fs rms (1 ps rms [typical] with enhanced triggering off) acquisition system - analog channels acquisition modes averaging from 2 to 10,000 waveforms can be included in an average waveform envelope from 1 to 210 9 waveforms included in min-max envelope fastacq ? fastacq ? optimizes the instrument for analysis of dynamic signals and capture of infrequent events, capturing >300,000 wfms/s on all 4 channels simultaneously fastframe ? acquisition memory divided into segments; maximum trigger rate >310,000 waveforms per second. time of arrival recorded with each event. frame finder tool helps to visually identify transients hi-res real-time boxcar averaging reduces random noise and increases resolution peak detect captures and displays narrow glitches at all real-time sampling rates. glitch widths: 1 ns at 125 ms/s; 1/sample rate at 250 ms/ s roll mode scrolls sequential waveform points across the display in a right-to-left rolling motion. works at sample rates up to 10 ms/s with a maximum record length of 40 ms sample acquires and displays sampled values waveform database accumulates waveform data providing a three-dimensional array of amplitude, time, and counts acquisition system C digital channels maximum sample rate (all channels) 12.5 gs/s timing resolution 80 ps channel-to-channel timing uncertainty <160 ps minimum detectable pulse width <400 ps maximum number of buses 16 number of channels per bus up to 24 (16 logic, 4 analog, 4 math) digital and mixed signal oscilloscopes C mso/dpo70000 series vertical system C digital channels www.tektronix.com 21
pinpoint ? trigger system trigger sensitivity internal dc coupled 4% of full scale from dc to 50 mhz 10% of full scale at 4 ghz 20% of full scale at 8 ghz 50% of full scale at 11 ghz aux input 50 (external trigger) 250 mv from dc to 50 mhz, increasing to 350 mv at 1.0 ghz a event and delayed b event trigger types edge, glitch, width, runt, timeout, transition time, logic pattern, logic state, setup/hold, window - all except edge, pattern, and state can be logic state qualified by up to two channels main trigger modes auto, normal, and single trigger sequences main, delayed by time, delayed by events, reset by time, reset by state, reset by transition. all sequences can include a separate horizontal delay after the trigger event to position the acquisition window in time trigger coupling dc, ac (attenuates <100 hz) hf rej (attenuates >20 khz) lf rej (attenuates <200 khz) noise reject (reduces sensitivity) trigger holdoff range 250 ns min to 12 s max trigger level range any channel 120% of full scale from center of screen auxiliary input 5 v line 0 v, not settable clock recovery system dpo models requires option st6g or option mth mso models standard clock recovery phase locked loop bandwidth fixed at fbaud/1600 clock recovery jitter (rms) <0.25% bit period + 2 ps rms for prbs data patterns <0.25% bit period + 1.5 ps rms for repeating "0011 data pattern minimum signal amplitude needed for clock recovery 1 div p-p up to 1.25 gbaud 1.5 div p-p above 1.25 gbaud tracking/acquisition range 2% of requested baud clock recovery frequency range 1.5 mbaud to 3.125 gbaud. recovered clock and regenerated data available for use with a bert. serial pattern trigger dpo models requires option st6g mso models standard datasheet 22 www.tektronix.com
nrz-encoded data up to 64 bit serial word recognizer, bits specified in binary (high, low, don't care) or hex format trigger on nrz-encoded data up to 1.25 gbaud 8b/10b-encoded data trigger on 8b/10b-encoded data at the following rates: 1.25 to 1.65, 2.1 to 3.2, 3.8 to 5.1, and 5.4 to 6.25 gbaud. pattern length up to 40 bits (1 to 4 valid 10-bit characters) alignment character is k28.5 (either disparity) communications-related triggers support for ami, hdb3, bnzs, cmi, mlt3, and nrz encoded communications signals. select among isolated positive or negative one, zero pulse form, or eye patterns as applicable to the standard. dpo models requires option mth mso models standard bus triggers maximum toggle rate i 2 c, spi, rs-232/422/485/uart: 10 mb/s usb: low-speed, full-speed can: 1 mb/s lin: 100 kb/s mil-std-1553b: 2 mb/s logic pattern trigger (mso models) threshold range p6780: C2 to +4.5 v p6717a/p6750: C1.5 to +4 v threshold accuracy 100 mv + 3% of threshold setting enhanced triggering enhanced triggering corrects the difference in timing between the trigger path and the acquired data path (supports all pinpoint trigger types on both a- and b-events except pattern trigger); default on (user-selectable); not available in fastacq mode. line trigger trigger on power line signal. level fixed at 0 v. visual trigger requires option vet max number of areas 8 area shapes rectangle, triangle, trapezoid, hexagon, user defined shapes (can have >40 vertices) compatibility visual trigger qualification is compatible with all trigger types and all trigger sequences digital and mixed signal oscilloscopes C mso/dpo70000 series pinpoint ? trigger system www.tektronix.com 23
trigger types trigger analog channels mso logic channels description comm 2 x support for ami, hdb3, bnzs, cmi, mlt3, and nrz encoded signals. bus x x trigger on a parallel or serial bus when the specific bus value is found. i 2 c 1 x x trigger on start, repeated start, stop, missing ack, address (7 or 10 bit), data, or address and data. spi 1 x x trigger on ss or data. can 3 x x trigger on start of frame, frame type, identifier, data, end of frame, missing ack, bit stuff error. lin 3 x x trigger on sync, identifier, data, ident and data, wakeup frame, sleep frame, error. flexray 3 x x trigger on start of frame, indicator bits, cycle count, header fields, identifier, data, end of frame, error. rs-232/422/485/uart 3 x x trigger on start bit, end of packet, data, and parity error. usb 3 x x low-speed or full-speed: trigger on sync, reset, suspend, resume, end of packet, token (address) packet, data packet, handshake packet, special packet, error. mil-std-1553b 3 x x trigger on sync, command word, status word, data, rt/img time, error. pci express 3 x x trigger on patterns (including ordered sets), character/symbol, error, control characters (gen 1 and gen 2 rates only) edge x x positive or negative slope on any channel or front-panel auxiliary input. coupling includes dc, ac, noise reject, hf reject, and lf reject. b event scan x b event scan is an a to b trigger sequence that will trigger and capture burst event data of interest as defined in the b event scan setup menu. captured bits can be scanned in a sequential or randomized fashion, and alternatively the trigger can toggle between two successive b trigger events. eye diagrams can be constructed with burst data acquired as a result of scanning b event. glitch x x trigger on or reject glitches of positive, negative, or either polarity. minimum glitch width is 150 ps (typical) with rearm time of 300 ps. pattern x x trigger when pattern goes false or stays true for specified period of time. pattern (and, or, nand, nor) specified for four input channels (and 16 logic channels on the mso70000 series) defined as high, low, or don't care. runt x trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again. event can be time- or logic- qualified. serial pattern 2 x trigger on nrz-encoded data up to 6.25 gbaud; above 1.25 gbaud requires 8b/10b encoded data. 1 included on mso models, optional on dpo models datasheet pinpoint ? trigger system 24 www.tektronix.com
trigger analog channels mso logic channels description includes pattern lock triggering to capture repeated acquisitions of long serial test patterns up to 6.25 gb/s. setup/hold x trigger on violations of both setup time and hold time between clock and data present on any two input channels. state x x any logical pattern of channels (1, 2, 3) (and 16 logic channels on the mso70000 series) clocked by edge on channel 4. trigger on rising or falling clock edge. timeout x x trigger on an event which remains high, low, or either, for a specified time period. selectable from 300 ps. transition x trigger on pulse edge rates that are faster or slower than specified. slope may be positive, negative, or either. trigger delay by events x x 1 to 2 billion events. trigger delay by time x x 3.2 ns to 3 million seconds. visual trigger 3 x trigger when the visual trigger expression is satisfied. width x x trigger on width of positive or negative pulse either within or out of selectable time limits (down to 150 ps). window x trigger on an event that enters or exits a window defined by two user-adjustable thresholds. event can be time or logic qualified. waveform analysis search and mark events search for glitches, runts, or serial bus events, as well as transition rate, pulse width, setup and hold, timeout, window violations, or find any logic or state pattern on any number of channels. any events found matching the search criteria are marked and placed in the event table. the search can use positive/negative slopes or both on any channels. when an event of interest is found, other similar events can be found using "mark all trigger events in record" in the pinpoint trigger control windows. search ddr read or write bursts with option ddra. the event table summarizes all found events. all events are time stamped in reference to trigger position. users can choose to stop acquisitions when an event is found. waveform measurements automatic measurements 53, of which 8 can be displayed on-screen at any one time; measurement statistics, user-definable reference levels, measurement within gates isolating the specific occurrence within an acquisition to measure the dpojet jitter and eye analysis application offers additional automated and advanced measurements such as jitter. amplitude related amplitude, high, low, maximum, minimum, peak-to-peak, mean, cycle mean, rms, cycle rms, positive overshoot, negative overshoot time related rise time, fall time, positive width, negative width, positive duty cycle, negative duty cycle, period, frequency, delay combination area, cycle area, phase, burst width 2 included on mso models, optional on dpo models 3 optional on all models digital and mixed signal oscilloscopes C mso/dpo70000 series pinpoint ? trigger system www.tektronix.com 25
eye-pattern related extinction ratio (absolute, %, db), eye height, eye width, eye top, eye base, crossing %, jitter (p-p, rms, 6sigma), noise (p-p, rms), signal/noise ratio, cycle distortion, q-factor histogram related waveform count, hits in box, peak hits, median, maximum, minimum, peak-to-peak, mean (), standard deviation (sigma), +1sigma, +2sigma, +3sigma bus decoding parallel data from selected channels is grouped as a parallel, multichannel bus and displayed as a single bus value. display can be binary, hexadecimal, or symbolic formats i 2 c 4 sclk and sda channels are displayed as a bus per the inter-integrated circuit specification spi 4 mosi, miso, sclk, and ss channels are displayed as a bus per the serial peripheral interface specification can 5 can_h, can_l, tx, or rx channels are displayed as a bus lin 5 data is displayed as a bus in accordance with the lin version 1 or version 2 standards flexray 5 bp, bm, tx, or rx signals are displayed as a bus hsic 5 data is displayed as a bus according to the usb2.0 hsic standard rs-232/422/485/uart 5 channel is displayed as a bus usb 5 channels are displayed as a bus per the usb specification mil-std-1553b 5 data is displayed as a bus pci express 5 gen 1, 2, or 3 data rates are automatically detected and displayed as a bus in accordance with the pcie standard mipi ? d-phy 5 dsi or csi2 channels are displayed as a bus per the mipi standard 8b/10b encoded 4 control and data characters are displayed as a bus waveform processing/math algebraic expressions define extensive algebraic expressions including waveforms, scalars, user-adjustable variables, and results of parametric measurements e.g. (integral (ch1 ? mean(ch1)) 1.414 var1) arithmetic add, subtract, multiply, divide waveforms and scalars filtering function user-definable filters. users specify a file containing the coefficients of the filter. several example filter files are provided frequency domain functions spectral magnitude and phase, real and imaginary spectra mask function generates a waveform database pixel map from a sample waveform. sample count can be defined math functions average, invert, integrate, differentiate, square root, exponential, log 10, log e, abs, ceiling, floor, min, max, sin, cos, tan, asin, acos, atan, sinh, cosh, tanh relational boolean result of comparison >, <, , , ==, != vertical units magnitude: linear, db, dbm phase: degrees, radians, group delay ire and mv units window functions rectangular, hamming, hanning, kaiser-bessel, blackman-harris, gaussian, flattop2, tek exponential customized functions using math plug-in interface an interface is provided to allow users to create their own custom math functions in matlab or visual studio 4 included on mso models, optional on dpo models 5 optional on all models datasheet waveform analysis 26 www.tektronix.com
display system color palettes normal, green, gray, temperature, spectral, and user-defined format yt, xy, xyz display resolution 1024 horizontal 768 vertical pixels (xga) display type 307.3 mm (12.1 in.) liquid-crystal active-matrix color display horizontal divisions 10 vertical divisions 10 waveform styles vectors, dots, variable persistance, infinite persistance computer system and peripherals operating system microsoft windows 7 ultimate C 64 bit os cpu intel i7-2600 processor, quad core, 3.4 ghz (dx models) intel core 2 duo processor, 3 ghz (c models) system memory 8 gb (16 gb on dx models) hard disk drive rear-panel, removable hard disk drive, 500 gb capacity solid state drive (option ssd) removable, 300 gb capacity (ssd is standard on dx models) cd/dvd drive front-panel cd-r/w, dvd-r drive mouse optical wheel mouse, usb interface keyboard usb interface input/output ports auxiliary input front panel. see trigger specifications auxiliary output rear panel. bnc connector, 0 to 3 v; default output is a-event trigger low true probe calibration output front panel. bnc connector, 10 v dc for dc probe calibration (signal available only during probe calibration) fast edge output front panel. sma connector provides fast edge signal. 1 khz 20%; 810 mv (base to top) 20% into 10 k load; 440 mv 20% into a 50 load recovered clock output front panel. sma connector, 1.25 gb/s, output swing 130 mv p-p into 50 at 1.25 gb/s. requires option st6g or option mth to enable on dpo70000 series, standard on mso70000 series recovered data output front panel. sma connector, 1.25 gb/s, output swing of 1010 repeating pattern 200 mv into 50 at 1.25 gb/s. requires option st6g or option mth to enable on dpo70000 series, standard on mso70000 series usb interface front panel: two usb 2.0 ports on 23, 25, and 33 ghz models, one on all others. allows connection of usb keyboard, mouse, or storage device rear panel: four usb ports. on 23, 25, and 33 ghz models, two of the ports are usb 3.0. on all other models, all four ports are usb 2.0. allows connection of usb keyboard, mouse, or storage devices digital and mixed signal oscilloscopes C mso/dpo70000 series www.tektronix.com 27
lxi web interface (lan extensions for instrumentation) class: lxi class c version: 1.3 audio input/output rear panel. miniature phone jacks for stereo microphone input and stereo line output external time base reference in rear panel. bnc connector; allows time base system to phase lock to external 10/100 mhz reference. optimized (by using a software switch) for either a highly stable clock or tracking mode gpib interface rear panel. ieee 488.2 standard keyboard port rear panel. ps/2 compatible lan port rear panel. rj-45 connector, supports 10base-t, 100base-t, and 1000base-t mouse port rear panel. ps/2 compatible esata port rear panel. external sata interface for esata storage devices power 100 to 240 v rms , 10%, 50/60 hz; 115 v rms 10%, <870 w, 400 hz; cat ii, <1100 va typical video out port connect to show the oscilloscope display, including live waveforms on an external monitor or projector. the primary windows ? desktop can also be displayed on an external monitor using these ports. alternatively, the ports can be configured to show the secondary windows ? desktop (also called extended desktop or dual-monitor display) dx models rear panel. both vga and dvi-d connectors. c models rear panel. dvi connector, female. dvi to vga 15-pin d-sub connector adapter provided. serial port rear panel. two db-9 com1 ports time base reference out bnc connector; provides ttl-compatible output of internal 10 mhz reference oscillator physical characteristics dimensions mm in. height 298 11.74 width 451 17.75 depth 489.97 19.29 rackmount dimensions mm in. height 311 12.25 width 480.1 18.9 depth (from rack mounting ear to back of instrument) 546.1 21.5 weight kg lb. net 24 53 shipping 34 67 rackmount weight kg lb. net 22 59 kit 2.7 6 datasheet input/output ports 28 www.tektronix.com
cooling C required clearance mm in. top 0 0 bottom 0 0 left side 76 3 right side 76 3 front 0 0 rear 0 0 environmental temperature operating 5 c to +45 c nonoperating C20 c to +60 c humidity operating 8% to 80% relative humidity (rh) at up to 32 c above +32 c up to +45 c; as limited by a 29.4 c wet bulb temperature nonoperating 5% to 95% relative humidity (rh) above +32 c up to +60 c; as limited by a 29.4 c wet bulb temperature altitude operating 3,000 m (9,843 ft.) nonoperating 12,000 m (39,370 ft.) united states government configuration baseline (usgcb) testing tektronix has tested the mso/dpo70000 series oscilloscopes for compatibility with the security configuration for information technology products specified in the usgcb settings for windows 7 and internet explorer regulatory electromagnetic compatibility 2004/108/ec; en 61326-2-1:2006 certifications ul 61010-1, csa 61010-1-04, lvd 2006/95/ec, en61010-1, iec 61010-1 digital and mixed signal oscilloscopes C mso/dpo70000 series physical characteristics www.tektronix.com 29
ordering information mso/dpo70000 models mso70404c 4 ghz mixed signal oscilloscope mso70604c 6 ghz mixed signal oscilloscope mso70804c 8 ghz mixed signal oscilloscope mso71254c 12.5 ghz mixed signal oscilloscope mso71604c 16 ghz mixed signal oscilloscope mso72004c 20 ghz mixed signal oscilloscope mso72304dx 23 ghz mixed signal oscilloscope mso72504dx 25 ghz mixed signal oscilloscope mso73304dx 33 ghz mixed signal oscilloscope DPO70404C 4 ghz digital phosphor oscilloscope dpo70604c 6 ghz digital phosphor oscilloscope dpo70804c 8 ghz digital phosphor oscilloscope dpo71254c 12.5 ghz digital phosphor oscilloscope dpo71604c 16 ghz digital phosphor oscilloscope dpo72004c 20 ghz digital phosphor oscilloscope dpo72304dx 23 ghz digital phosphor oscilloscope dpo72504dx 25 ghz digital phosphor oscilloscope dpo73304dx 33 ghz digital phosphor oscilloscope standard accessories accessories 071-173x-xx user manual (please specify language when ordering) tca-292mm (4 included) tekconnect ? to 2.92 mm adapter (c models) tca-292d (4 included) tekconnect ? to 2.92 mm adapter (dx models) tca-bnc tekconnect ? to bnc adapter accessory pouch front cover mouse keyboard power cord (please specify power plug option when ordering) dvi to vga adapter (c models only) static protection wrist strap datasheet 30 www.tektronix.com
gpib programmer's reference (on product hdd) performance verification procedure pdf file calibration certificate documenting nist traceability z 540-1 compliance and iso9001 --- p6717a general purpose logic probe (mso models) --- logic probe deskew fixture (mso models) instrument options record length options option description opt. 5xl 62.5 ms/ch (standard on mso models) opt. 10xl 125 ms/ch opt. 20xl 250 ms/ch (for models of bandwidth 12.5 ghz only.) opt. 50xl 500 ms/ch on 4 channels, 1 g/ch on 2 channels (dx models only) storage options option description opt. ssd additional removable disk C solid state drive (standard on dx models) trigger and search options option description opt. lt waveform limit testing opt. mth mask testing for serial standards. includes hardware clock recovery for up to 3.125 gb/s (standard on mso models) opt. st6g protocol triggering and decoding for 8b/10b-encoded serial signals (up to 6.25 gb/s). includes hardware clock recovery and pattern lock triggering (standard on mso models) digital and mixed signal oscilloscopes C mso/dpo70000 series www.tektronix.com 31
advanced analysis options option description opt. d-phy mipi ? d-phy essentials C characterization and analysis solution (requires opt. dja) opt. ddra ddr memory bus analysis (requires opt. dja) opt. dja dpojet advanced jitter and eye diagram analysis (standard on mso models) opt. dp12 displayport 1.2 source test automation software (requires opt. dja) (requires opt. 5xl or higher) opt. dsa digital serial analysis bundle (includes 5xl, dja, mth, st6g) opt. errdt frame and bit error rate detector for high-speed serial standards (requires opt. st6g) opt. et3 ethernet compliance test software (requires ethernet test fixture) opt. fc-16g fiber channel - 16g dpojet essentials opt. hsic hsic essentials - electrical validation and protocol decode solution (requires opt. dja) opt. ht3 hdmi compliance test software opt. ht3ds hdmi direct synthesis for hdmi 1.4 opt. mhd mhl advanced analysis and compliance software (requires opt. dja and opt 2xl or higher) opt. most electrical compliance and debug test solution for most50 and most150 (requires opt. dja) opt. m-phy mipi ? m-phy essentials C characterization and analysis solution (requires opt. dja) opt. m-phytx m-phy automated transmitter solution (requires opt. dja) opt. m-phyrx m-phy automated receiver solution (requires opt. st6g) (requires opt. errdt) opt. pce3 pci express ? transmitter compliance and debug (requires opt. dja) (for models of bandwidth 6 ghz only) opt. pwr power measurement and analysis software (at least opt. 2xl and a tca-1meg tekconnect ? 1 m buffer amplifier are recommended for use) opt. sas3 sas3 12 gb/s essentials (requires opt. dja and 2xl or higher) (for models of bandwidth 20 ghz only) opt. sfp-tx sfp+ compliance and debug solution (requires opt. dja) opt. sfp-wdp sfp+ compliance and debug solution C wdp measurement (requires opt. dja) opt. sdla64 serial data link analysis visualizer opt. sr-aero aerospace serial triggering and analysis (mil-std-1553b) opt. sr-auto automotive serial triggering and analysis (can/lin/flexray) opt. sr-comp computer serial triggering and analysis (rs-232/422/485/uart) opt. sr-cust custom serial analysis (standard on all models) opt. sr-dphy mipi ? d-phy (dsi / csi2) serial analysis opt. sr-embd embedded serial triggering and analysis (i 2 c, spi) (standard on mso models) opt. sr-enet ethernet serial analysis (10base-t and 100base-tx) opt. sr-pcie pci express serial analysis (opt. st6g required for triggering) opt. sr-usb usb serial triggering and analysis opt. sva am/fm/pm audio signal analysis (requires opt. sve) opt. sve signalvu ? essentials C vector signal analysis software opt. svm general purpose modulation analysis (requires opt. sve) opt. svo flexible ofdm analysis (requires opt. sve) opt. svp advanced signal analysis (including pulse measurements) (requires opt. sve) opt. svt frequency and phase settling time measurements (requires opt. sve) opt. sv23 wlan 802.11a/b/g/j/p measurement application (requires opt sve) opt. sv24 wlan 802.11n measurement application (requires opt sv23) opt. sv25 wlan 802.11ac measurement application (requires opt sv24) opt. tbt-tx thunderbolt transmitter characterization, debug, and compliance testing (requires opt. dja and opt. 2xl or higher) (for models of bandwidth 16 ghz only) datasheet 32 www.tektronix.com
option description opt. uhs2 uhs-ii-host-tx and uhs-ii-device-tx measurements (for models of bandwidth 6 ghz only) opt. usb usb 2.0 compliance test software (requires tdsusbf usb test fixture) opt. usbhsic usb2.0 and hsic bundle, includes options opt. dja, hsic, sr-usb, and usb opt. usb3 usb 3.0 compliance and analysis software (requires opt. dja) (for models of bandwidth 8 ghz only) opt. vet visual trigger opt. 10g-kr 10gbase-kr/kr4 compliance and debug solution (requires opt. dja) (for models of bandwidth 16 ghz only) digital and mixed signal oscilloscopes C mso/dpo70000 series www.tektronix.com 33
floating license options floating licenses offer an alternative method to manage your tektronix asset. floating licenses allow license-key enabled options to be easily moved among all your mso/dpo70000, dpo7000, and mso/dpo5000 series oscilloscopes. floating licenses are available for the license-key enabled options listed below. check http://www.tek.com/products/oscilloscopes/floatinglicenses for additional information about floating license options. option description dpofl-asm advanced event search and mark dpofl-d-phy mipi ? d-phy essentials C characterization and analysis solution (requires opt. dja) dpofl-ddra ddr memory bus analysis (requires opt. dja) dpofl-dja jitter and eye analysis tools C advanced (dpojet) dpofl-dp12 displayport 1.2 source test automation software dpofl-dsa digital serial analysis bundle dpofl-errdt frame and bit error rate detector for high-speed serial standards (requires opt. st6g) dpofl-et3 ethernet compliance testing (requires ethernet test fixture) dpofl-hsic hsic essentials - electrical validation and protocol decode solution (requires opt. dja) (requires opt. sr-cust) dpofl-ht3 hdmi compliance testing dpofl-ht3ds hdmi direct synthesis for hdmi 1.4 dpofl-lt waveform limit testing dpofl-most elwctrical compliance and debug test solution for most50 and most150 (requires opt. dja) dpofl-mphy mipi ? m-phy essentials C characterization and analysis solution dpofl-m-phytx m-phy automated transmitter solution (requires opt. dja) dpofl-m-phyrx m-phy automated receiver solution (requires opt. st6g) (requires opt. errdt) dpofl-mth mask testing, includes hardware clock recovery dpofl-pce3 pci express ? transmitter compliance and debug (requires opt. dja) (for models of bandwidth 6 ghz only) dpofl-ptd protocol trigger and decode for 8b/10b dpofl-ptm-h serial protocol trigger and decode up to 6.25 gb/s dpofl-pwr power measurement and analysis (at least opt. 2xl and a tca-1meg tekconnect ? 1 m buffer amplifier are recommended for use) dpofl-sas3 sas 12 gb/s essentials (requires opt. dja and opt. 2xl or higher) (for models of bandwidth 20 ghz only) dpofl-sfp-tx sfp+ compliance and debug solution (requires opt. dja) dpofl-sfp-wdp sfp+ compliance and debug solution C wdp measurement (requires opt. dja) dpofl-sdla64 serial data link analysis visualizer dpofl-sr-aero aerospace serial triggering and analysis (mil-std-1553b) dpofl-sr-auto automotive serial triggering and analysis (can/lin/flexray) dpofl-sr-comp computer serial triggering and analysis (rs-232/422/485/uart) dpofl-sr-dphy mipi ? d-phy (dsi / csi2) serial analysis dpofl-sr-embd embedded serial triggering and analysis (i 2 c, spi) dpofl-sr-enet ethernet serial analysis (10base-t and 100base-tx) dpofl-sr-pcie pci express serial analysis (opt. st6g required for triggering) dpofl-sr-usb usb serial triggering and analysis dpofl-st6g 8b/10b serial protocol trigger and decode up to 6.25 gb/s dpofl-stu upgrade from 3.125 gb/s to 6.25 gb/s 8b/10b serial protocol trigger and decode dpofl-sva am/fm/pm audio signal analysis (requires opt. sve) dpofl-sve signalvu ? essentials C vector signal analysis software datasheet 34 www.tektronix.com
option description dpofl-svm general purpose modulation analysis (requires opt. sve) dpofl-svo flexible ofdm analysis (requires opt. sve) dpofl-svp advanced signal analysis (including pulse measurements) (requires opt. sve) dpofl-svt frequency and phase settling time measurements (requires opt. sve) dpofl sv23 wlan 802.11a/b/g/j/p measurement application (requires opt. sve) dpofl sv24 wlan 802.11n measurement application (requires opt. sv23) dpofl sv25 wlan 802.11ac measurement application (requires opt. sv24) dpofl-tbt-tx thunderbolt transmitter characterization, debug, and compliance testing (requires opt. dja and opt. 2xl or higher) (for models of bandwidth 16 ghz only) dpofl-uhs2 uhs-ii-host-tx and uhs-ii-device-tx measurements (for models of bandwidth 6 ghz only) dpofl-usb usb 2.0 compliance testing (requires tdsusbf usb test fixture) dpofl-usb3 usb 3.0 essentials (requires opt. dja) (for models of bandwidth 8 ghz only) dpofl-usbpwr usb power adapter/eps compliance automated test solution (not supported on 70000d models) dpofl-vet visual trigger dpofl-xl02 extended record length C 31.25 m samples/ch dpofl-xl05 extended record length C 62.5 m samples/ch dpofl-xl010 extended record length C 125 m samples/ch dpofl-xl020 extended record length C 250 m samples/ch (for models of bandwidth 12.5 ghz only) dpofl-10g-kr 10gbase-kr/kr4 compliance and debug solution (requires opt. dja) (requires opt. sr-cust) (for models of bandwidth 16 ghz only) tekexpress application framework options option description tekexp tekexpress ? automation framework opt. d-phytx d-phy automated solution opt. diiva diiva automation solution opt. dp-sink displayport sink compliance automation software opt. heac heac automated solution opt. sas-rsg stand-alone sas receiver measurements opt. sas-tsg stand-alone sas transmitter measurements opt. sas-tsgw sas transmitter measurements including a set of wdp measurements (requires opt. sas-tsg) opt. sata-tsg sata phy/tsg/oob transmitter tests for tekexpress ? opt. sata-rsg sata rsg/rmt receiver tests for tekexpress ? opt. sfp-tx sfp+ compliance and debug solution (requires opt. dja) (for models of 16 ghz only) opt. sfp-wdp sfp+ compliance and debug solution with twdpc measurements (requires opt. sfp-tx) (for models of 16 ghz only) opt. usbpwr usb power adapter/ eps compliance automated test solution (not supported on 70000d models) opt. usb-rmt tekexpress ? automated usb 3.0 receiver solution opt. usb-tx tekexpress ? automated usb 3.0 solution (requires opt. dja) (for models of bandwidth 8 ghz only) opt. xgbt 10gbase-t automated solution upgrade options the mso/dpo70000 series instruments can be easily upgraded after initial time of purchase. to upgrade an existing mso/ dpo70000, order dpo-up and an option listed below. for example, dpo-up ddra. memory upgrades for dpo70000 series xl02 standard configuration to option 2xl configuration xl05 standard configuration to option 5xl configuration digital and mixed signal oscilloscopes C mso/dpo70000 series www.tektronix.com 35
xl010 standard configuration to option 10xl configuration xl020 standard configuration to option 20xl configuration (for models of bandwidth 12.5 ghz only) memory upgrades for mso/ dpo70000 series xl25 option 2xl configuration to option 5xl configuration xl210 option 2xl configuration to option 10xl configuration xl220 option 2xl configuration to option 20xl configuration (for models of bandwidth 12.5 ghz only) xl250 option 2xl configuration to option 50xl configuration (dpo dx models only) xl510 option 5xl configuration to option 10xl configuration xl520 option5xl configuration to option 20xl configuration (for models of bandwidth 12.5 ghz only) xl550 option 5xl configuration to option 50xl configuration (dx models only) xl1020 option 10xl configuration to option 20xl configuration (for models of bandwidth 12.5 ghz only) xl1050 option 10xl configuration to option 50xl configuration (dx models only) trigger and search upgrades for mso/dpo70000 series lt waveform limit testing mth mask testing for serial standards with hardware clock recovery st6g protocol triggering and decoding for 8b/10b-encoded serial signals (up to 6.25 gb/s) stu increase protocol triggering and decoding from 3.125 gb/s to 6.25 gb/s advanced analysis upgrades for mso/dpo70000 series asm advanced event search and mark d-phy mipi ? d-phy characterization and analysis solution (requires opt. dja) ddra upgrade to option ddra (requires opt. dja) djah dpojet jitter and eye diagram analysis (upgrade for dpo70404 - dpo70804 models) djau dpojet jitter and eye diagram analysis (upgrade for dpo71254 - dpo73304 models) dp12 displayport 1.2 source test automation software (requires opt. dja and opt. 5xl or higher) dsah digital serial analysis bundle (mso models with sn below c240000 or b140000, all dpo models) (for models of bandwidth 8 ghz only) dsau mso digital serial analysis bundle (mso models with sn below c240000 or b140000, all dpo models) (for models of bandwidth 12.5 ghz only) eq equalization to upgrade from option sle to option sla (requires opt. sle) errdth frame and bit error rate detector (requires opt. st6g) (for models of bandwidth 8 ghz only) errdtu frame and bit error rate detector (requires opt. st6g) (for models of bandwidth 12.5 ghz only) et3 ethernet compliance test software opt. fc-16g fiber channel - 16g dpojet essentials hsic hsic essentials - electrical validation and protocol decode solution (requires opt. dja) (requires opt. sr-cust) ht3 hdmi compliance test software ht3ds hdmi direct synthesis for hdmi 1.4 mhd mhl advanced analysis and compliance software (requires opt. dja and opt. 2xl or higher) most electrical compliance and debug test solution for most50 and most150 (requires opt. dja) m-phy mipi ? m-phy characterization and analysis solution (requires opt. dja) pce3 pci express ? transmitter compliance and debug (requires opt. dja) (for models of bandwidth 6 ghz only) ptd protocol decoding for 8b/10b-encoded serial signals pwr power measurement and analysis software sas3 sas 12 gb/s essentials (requires opt. dja and opt. 2xl or higher) (for models of bandwidth 20 ghz only) datasheet 36 www.tektronix.com
sfp-tx sfp+ compliance and debug solution (requires opt. dja) (for models of bandwidth 16 ghz only) sfp-wdp sfp+ compliance and debug solution with twdpc measurements (requires opt. sfp-tx) (for models of bandwidth 16 ghz only) sdla64 serial data link analysis visualizer sr-aero aerospace serial triggering and analysis (mil-std-1553b) sr-auto automotive serial triggering and analysis (can/lin/flexray) sr-comp computer serial triggering and analysis (rs-232/422/485/uart) sr-cust custom serial analysis kit for developers (standard on all models) sr-dphy mipi ? d-phy (dsi / csi2) serial analysis sr-embd embedded serial triggering and analysis (i 2 c, spi) sr-pcie pci express serial analysis (opt. st6g required for triggering) sr-usb usb serial triggering and analysis ssd additional removable disk C solid state drive sva am/fm/pm audio signal analysis (requires opt. sve, sveh, or sveu) sveh signalvu ? essentials C vector signal analysis software (for models of bandwidth 8 ghz only) sveu signalvu ? essentials C vector signal analysis software (for models of bandwidth 12.5 ghz only) svm general purpose modulation analysis (requires opt. sve, sveh, or sveu) svo flexible ofdm analysis (requires opt. sve, sveh, or sveu) svp advanced pulsed signal analysis including measurements (requires opt. sve, sveh, or sveu) svt frequency and phase settling time measurements (requires opt. sve, sveh, or sveu) sv23 wlan 802.11a/b/g/j/p measurement application (requires opt. sve, sveh or sveu) sv24 wlan 802.11n measurement application (requires opt. sv23) sv25 wlan 802.11ac measurement application (requires opt. sv24) tbt-tx thunderbolt transmitter characterization, debug, and compliance testing (requires opt. dja and 2xl or higher) (for models of bandwidth 16 ghz only) uhs2 uhs-ii-host-tx and uhs-ii-device-tx measurements (for models of bandwidth 6 ghz only) usb usb 2.0 compliance test software usb3 usb 3.0 compliance and analysis software (requires opt. dja) (for models of bandwidth 8 ghz only) veth visual trigger (for models of bandwidth 8 ghz only) vetu visual trigger (for models of bandwidth 12.5 ghz only) 10g-kr 10gbase-kr/kr4 compliance and debug solution (requires opt. dja) (requires opt. sr-cust) (for models of bandwidth 16 ghz only) other upgrades for mso/ dpo70000 series if upgrade installation service hdd spare hard disk drive ssd spare solid state drive investment protection options as signals get faster and new standards are developed, your investment in an mso/dpo70000 series instrument can evolve with your needs. you can upgrade the bandwidth of the unit you own today. you can take advantage of mso/dpo70000 series performance improvements by upgrading your existing unit to a new series, or adding mso features to your current dpo model. contact your local tektronix representative to discuss the full range of options available to ensure your mso/dpo70000 series oscilloscope has the tools you need for your next project. digital and mixed signal oscilloscopes C mso/dpo70000 series www.tektronix.com 37
language options opt. l0 english manual opt. l1 french manual opt. l3 german manual opt. l5 japanese manual opt. l7 simplified chinese manual opt. l8 traditional chinese manual opt. l9 korean manual opt. l10 russian manual opt. l99 no manual power plug options opt. a0 north america power plug (115 v, 60 hz) opt. a1 universal euro power plug (220 v, 50 hz) opt. a2 united kingdom power plug (240 v, 50 hz) opt. a3 australia power plug (240 v, 50 hz) opt. a5 switzerland power plug (220 v, 50 hz) opt. a6 japan power plug (100 v, 110/120 v, 60 hz) opt. a10 china power plug (50 hz) opt. a11 india power plug (50 hz) opt. a12 brazil power plug (60 hz) opt. a99 no power cord service options opt. c3 calibration service 3 years opt. c5 calibration service 5 years opt. d1 calibration data report opt. d3 calibration data report 3 years (with opt. c3) opt. d5 calibration data report 5 years (with opt. c5) opt. g3 complete care 3 years (includes loaner, scheduled calibration, and more) opt. g5 complete care 5 years (includes loaner, scheduled calibration, and more) opt. if upgrade installation service opt. r3 repair service 3 years (including warranty) opt. r5 repair service 5 years (including warranty) datasheet 38 www.tektronix.com
recommended accessories probes p7633 33 ghz low noise trimode ? probe p7630 30 ghz low noise trimode ? probe p7625 25 ghz low noise trimode ? probe p7520a 25 ghz trimode ? probe p7516 16 ghz trimode ? probe p7513a 13 ghz trimode ? differential probe p7313 13 ghz z-active ? differential probe p7313sma 13 ghz trimode ? differential sma probe p7508 8 ghz trimode ? probe p7380 8 ghz z-active ? differential probe p7506 6 ghz trimode ? probe p7504 4 ghz trimode ? probe p6780 differential input logic probe p6750 d-max ? technology logic probe p6717a general-purpose logic probe p6251 dc to 1 ghz, 42 v, differential probe (requires tca-bnc adapter) p6250 dc to 500 mhz, 42 v, differential probe (requires tca-bnc adapter) tcpa300/tcpa400 series current measurement systems p5200/p5205/p5210 high-voltage differential probes 067-2431-xx probe deskew fixture for sma or solder-down connections (up to 30 ghz) 067-0484-xx analog probe calibration and deskew fixture (4 ghz) 067-1586-xx analog probe deskew fixture (>4 ghz) 067-1686-xx power deskew fixture adapters tca-1meg tekconnect ? high-impedance buffer amplifier. includes p6139a passive probe tca-292mm tekconnect ? to 2.92 mm adapter (20 ghz bandwidth) tca-292d tekconnect ? to 2.92 mm adapter (33 ghz bandwidth) tca-bnc tekconnect ? to bnc adapter tca-n tekconnect ? to n adapter tca-sma tekconnect ? to sma adapter tca-vpi50 50 tekvpi to tekconnect adapter tca75 8 ghz precision tekconnect ? 75 to 50 adapter with 75 bnc input connector cables dpoacqsync multi-scope synchronization kit (includes fast edge source, cables, power splitters, carrying case) 012-0991-xx gpib cable (1 m) 012-0991-xx gpib cable (2 m) p6780 logic probe standard accessories 067-2298-xx deskew fixture, logic probes 020-3035-xx standard adapter 020-3036-xx wide body adapter 020-3032-00 25/55 holder 020-3021-00 heat strip wire (4.57 m) digital and mixed signal oscilloscopes C mso/dpo70000 series www.tektronix.com 39
020-3031-xx hand browsing adapter 020-3033-xx flex adapter 020-3038-xx lead set ground 020-3042-xx probe grouper (including header pins) 020-3034-xx ferrite beads 020-3037-xx wire tubing (4.57 m) p6717a logic probe standard accessories hex-p6960pin d-max probe footprint to square pin header nex-hd2header mictor to square pin header adapter 067-2298-xx deskew fixture, logic probes 206-0559-xx extension ground tip 131-5638-xx probe tip 206-0569-xx ic grabber 352-1115-xx probe grouper 196-3501-xx lead sets 196-3497-xx ground lead sets memory testing nex-ddr3mp78bsc ddr3 4/8 solder chip interposer nex-ddr3mp78bscsk ddr3 4/8 socket chip interposer nex-ddr3mp96bsc ddr3 16 solder chip interposer nex-ddr3mp96bscsk ddr3 16 socket chip interposer nex-ddr2mp60bsc ddr2 4/8 solder chip interposer nex-ddr2mp60bscsk ddr2 4/8 socket chip interposer nex-ddr2mp84bsc ddr2 16 solder chip interposer nex-ddr2mp84bscsk ddr2 16 socket chip interposer instrumented dimm for ddr3 order scope nexvu card for udimm raw card e. (contact http://www.nexustechnology.com ) system test tdsusbf test fixture for use with opt. usb tf-xgbt 10gbase-t fixture for use with option xgbt software ethernet test fixture. order through crescent heart software ( http://www.c-h-s.com ) tf-heac-tpa-kit heac tpa-kit consists of: main board; plug a-type board; plug c-type board; 2 tdr board with a receptacle; 2 tdr board with c receptacle tf-hdmi-tpa-s/stx hdmi type c fixture set for tx/rx tf-hdmic-tpa-s/stx tf-hdmic-tpa-s/stx tf-hdmie-tpa-kit hdmi type e fixture set tf-hdmid-tpa-p/r hdmi type d fixtures tf-mhl-tpa-tek mhl fixture set s46-6666-a-amer keithley instruments rf/microwave switch system, 32 channel, unterminated, americas power cord s46-6666-a-asiap keithley instruments rf/microwave switch system, 32 channel, unterminated, asia-pacific power cord s46-6666-a-euraf keithley instruments rf/microwave switch system, 32 channel, unterminated, europe/africa power cords tf-usb3-ab-kit usb 3.0 a/b fixture/cable kit tf-usb3-a-p usb 3.0 a plug fixture tf-usb3-a-r usb 3.0 a receptacle fixture kit tf-usb3-b-r usb 3.0 b receptacle fixture kit datasheet 40 www.tektronix.com
tf-gbe-atp 10/100/1000base-t advanced test package (consists of test fixture pcb set, rj45 interconnect cable, and 1000base-t jitter test channel cable) tf-gbe-btp 10/100/1000base-t basic test package (consists of test fixture pcb set and rj45 interconnect cable) tf-gbe-jtc 103 meter 1000base-t jitter test channel cable tf-gbe-sic short (4 inch (0.1 meter)) rj45 interconnect cable tf-xgbt test fixtures that complement the use of the tekexp-xgbt solution transit case (carbon fiber). other k4000 oscilloscope cart 016-1985-xx rackmount kit 077-0076-xx service manual, pdf on hard drive 016-2039-00 transit case (metal frame, wood panels) 016-2043-00 transit case (carbon fiber) digital and mixed signal oscilloscopes C mso/dpo70000 series www.tektronix.com 41
warranty one-year warranty covering all parts and labor. tektronix is registered to iso 9001 and iso 14001 by sri quality system registrar. product(s) complies with ieee standard 488.1-1987, rs-232-c, and with tektronix standard codes and formats. datasheet asean / australasia (65) 6356 3900 austria 00800 2255 4835* balkans, israel, south africa and other ise countries +41 52 675 3777 belgium 00800 2255 4835* brazil +55 (11) 3759 7627 canada 1 800 833 9200 central east europe and the baltics +41 52 675 3777 central europe & greece +41 52 675 3777 denmark +45 80 88 1401 finland +41 52 675 3777 france 00800 2255 4835* germany 00800 2255 4835* hong kong 400 820 5835 india 000 800 650 1835 italy 00800 2255 4835* japan 81 (3) 6714 3010 luxembourg +41 52 675 3777 mexico, central/south america & caribbean 52 (55) 56 04 50 90 middle east, asia, and north africa +41 52 675 3777 the netherlands 00800 2255 4835* norway 800 16098 people's republic of china 400 820 5835 poland +41 52 675 3777 portugal 80 08 12370 republic of korea 001 800 8255 2835 russia & cis +7 (495) 6647564 south africa +41 52 675 3777 spain 00800 2255 4835* sweden 00800 2255 4835* switzerland 00800 2255 4835* taiwan 886 (2) 2722 9622 united kingdom & ireland 00800 2255 4835* usa 1 800 833 9200 * european toll-free number. if not accessible, call: +41 52 675 3777 updated 10 april 2013 for further information. tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. please visit www.tektronix.com . copyright ? tektronix, inc. all rights reserved. tektronix products are covered by u.s. and foreign patents, issued and pending. information in this publication supersedes that in all previously published material. specification and price change privileges reserved. tektronix and tek are registered trademarks of tektronix, inc. all other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies. 06 dec 2013 55w-23446-23 www.tektronix.com

▲Up To Search▲

Price & Availability of DPO70404C

	To Download DPO70404C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .